Thread Repair Kits for BSW-Thread

BSW = British Standard Whitworth Coarse Thread Series BS 84

the Set includes:
Drill HSS
STI Bottoming Tap HSSG
Inserting Tool
Tang Break Tool
Wire Thread Inserts - type: “free running“ - length: 1.5 D

for Thread	Inserting Tool	Tang Break Tool	Drill	Thread Inserts  pcs 1,5xD	Art.Nr.
BSW 1/8 x 40	EBW03	BZ003	3,4mm	20	B4141
BSW 3/16 x 24	EBW05	BZ005	5,0mm	20	B4142
BSW 1/4 x 20	EBW06	BZ006	6,7mm	20	B4143
BSW 5/16 x 18	EBW07	BZ006	8,3mm	20	B4144
BSW 3/8 x 16	EBW08	BZ008	9,9mm	15	B4145
BSW 7/16 x 14	EBW10	BZ010	11,6mm	10	B4146
BSW 1/2 x 12	EBW12	BZ012	13,0mm	10	B4147
BSW 9/16 x 12	EBW14			5	B4148
BSW 5/8 x 11	EBW14			5	B4149
BSW 11/16 x 11	EBW16			5	B4153
BSW 3/4 x 10	EBW18			5	B4150
BSW 7/8 x 9	EBW22			5	B4151
BSW 1 x 8	EBW24			4	B4152

	1.Drilling Clear the damaged thread with a standard drill. To repair a spark plug thread no pre-drilling is necessary if using the special spark plug tap.
	2.Tapping Use the special BaerCoil taps for cutting the holding thread into the hole. It is recommended to use a suitable cutting oil.
	3.Install the insert Place insert on the installation tool ans position the adjustable ring so that the insert tang is centred in the tang slot. Wind the insert with a light downward pressure until a half turn below the surface. Don't worl against thread direction as the tang could break.
	4.Tang removal Lift the tool from tang, turn tool 90° and tap down sharply. Use tang break-off tool where supplied. For bigger sizes and spark plug use a long nose pliers to remove the tang.

Instruction for use